2*21m Autoclave Device for Aerated Concrete Block Building Materials
|FOB Price:||US $50,000-60,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $50,000-60,000/ Piece|
|Production Capacity:||10 Set/Month|
|Payment Terms:||L/C, T/T, Money Gram|
- Model NO.: AAC autoclave
- Customized: Customized
- Type: Hydraulic Shock
- Length: 31m
- Trademark: OLYMSPAN
- Specification: ASME
- Certification: CE, ISO
- Automatic Grade: Automatic
- Inside Diameter: 2m
- Color: Blue or Customized
- Transport Package: Nude
- Origin: Changzhou, Jiangsu
We apply to the advanced workmanship when manufacturing the wood drying tank. This kind of tank is developed and manufactured by cooperation between our experienced staff of the boiler and autoclave industries and the Nanjing Forestry University.
The tank is heated by steaming or pressing or by adding the conductive oil. We dewater the wood undue the vacuum with a fast speed. We ensure that the wood has been cut in six sides and the wood skin has been removed. There are 2 kinds of water migration within the wood: The surface water migration and the inner one. The normal drying only takes the air temperature, the moisture and the circulation wind speed into consideration. The around air pressure is the main factor that affects the inner water migration speed of the wood. The higher the pressure is, the faster the speed is. Thus the vacuum drying is faster.
Cooperate with the Nanjing Forestry University, our expert can provide different kinds of drying procedure or process based on the materials or according to customers' requirements.
1)It can be applied to the process of different kinds of materials and achieve good results. When processing the rough wood or some valuable types, using this kind of tank can shorten the drying cycle and improve the drying quality. It is especially suitable for the process of the small amount wood of different types and it is good for the small process factories.
2)This tank has the advantages of high efficiency, energy saving and low cost. Its speed is 4-9 times of that of the regular kiln. And its energy consumption is 50% reduction. And its price is also quite reasonable.
3)Its drying quality is high. The moisture content is average and there won't be any buckling deformation and aberration in color.
4)The tank is reliable and easy and convenient to operate. The parts are made of high quality material. And we'll monitor the moisture content, the material temperature, the material moisture and the vacuum parameters in many parts of the tank. And the tank is reliable and accurate. We have two types of regular procedure control and the microprocessor control for customers' choice.
5)The tank will be steel structure. And the appearance is beautiful and compact. It is convenient and easy to install and transport. It takes up less space.
6)The inner structure is reasonable and it applies the aluminum fan blade. The airflow is uniform and the obstruction is low.
7)The tank is corrosion resistant and is of long life span. We do the treatment of anti-corrosion to the inner side of the tank. And the inner parts are made of stainless steel.
8) Radiator is made of steel and aluminum composite material. It is corrosion resistant and can dissipate the heat and is of long life span.
9)The tank is light and can preserve heat well. Less heat will be lost.
10)the vacuum pump is of two stages and we exhaust the air in each stage with a uniform speed.
11)We design, manufacture, inspect, and install the equipment according to the standard of ISO 9001 international quality system in this industry.
12)We supply the matched wood and boiler to the wood drying tank. The boiler is safe and easy and convenient to operate. It is also of high efficient.